3D Scanner

We provide high quality and easy-to-use

3D scanner to the industry

our 3D scanner provides high precision by white light measurement technology, enhanced detail with
high-resolution twin-camera and fast and easy process throughout the automation.

Home > Product


	3D scanner
	Rexcan III
	Rexcan DS2
	Rexcan DS

	Automation Engine
	ARX 300 / 600

	Expansion System
	Photogrammetry
	Turntable

	Download
	Download

Rexcan III - 3D Scanner

The Rexcan III is a high performance industrial 3D scanner
developed for quality inspection and reverse engineering.

It uses twin-camera and white-light Phase-Shifting Trianglation(PSI)
technique to achieve high resolution, enhanced anccuracy, with decrease data noise.
user convenience is maximized by
implementing Solutionix's abundant knowledge in the field of 3D measurement.

Features

High precision, high resolution

-	3D Scanner Rexcan III provides high resolution, high precision(less than 10㎛) with low noise by its phase-shifting optical triangulation and CCD twin-cameras technology.

3D scan data of UK coin by Rexcan III (2.0M) - Minimum point spacing : 0.011mm

-	3D Scanner Rexcan III is tested under VDI 2634 part 2 : practical acceptance and re-verification methods for the evaluation of the accuracy of optical 3-D measuring imaging systems based on area scanning.

Test of pricision under VDI 2634 Part 2, deviation of each artifact station

-	Rexcan III has 4 inter-upgradeable models, 0.8M, 1.4M, 2.0M, 5.0M, and so customer can get more accurate data by upgrading camera with low additional cost.

Flexible 3D scanning measurement volumes

-	Each lens set supports 4 different measurement volumes, thus in all there are 20 available volumes.

Supporting 4 different camera position

3D scanning Measurement Depth

-	Due to an enhanced depth/diameter ratio, which was achieved by an additional 10˚ triangulation angle with 3D Scanner Rexcan III, deep areas on objects are no longer difficult for 3D scanning.

-	Depth-diameter ratio > 1.5